Door Rattles

Sorry but those doors rattle bad. You can adjust the rubber stoppers, or put electrical tape around the catch loop, sometimes that helps. The window net front tab also rattles. 4 door models are even worse.

We did find a product quality issue that is a major contributor to the problem: poorly designed door bushings. The door uses 2 hinge tubes with a bushing in the middle. The outside of the bushing has support fins to stick it into the tube, but the bottom tube gets stuck and the top tube grinds off the fins and the hinge becomes loose.

What I've come up with is a kit that replaces those bushings with a modified 3D printed version, and a spacer that locks the window net tab so it doesn't rattle. If you have access to a 3D printer and the appropriate filament, you can get the parts and finishing instructions on my Thingiverse page here.

If you don't have access to a printer, contact me and I can send you a pre-finished kit, I usually keep a small supply of them in stock. $20 for a 2 door and $25 for a 4 door.